Led driver controller constant current power high voltage

#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE DRIVERS#
#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE FULL#
#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE SOFTWARE#

#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE DRIVERS#

In addition to aВ maximum current, these drivers also have a corresponding maximum voltage that they are capable of supporting, so both specifications must be taken into account when determining driver compatibility with a given LED. LED drivers are current sources, meaning that they supply a user-set current at the specified forward voltage of the LED being driven.

Given for an output current at 'High' TTL level not exceeding 10% of the selected current range limit.ДЄll technical data are valid at 23 В± 5 вЊ and 45 В± 15% relative humidity (non-condensing).Дetermining LED Compatibility: LED Current and Max LED Forward Voltage.

#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE FULL#

Small Signal Bandwidth: Modulation not exceeding 20% of full scale current.В The driver accepts other waveforms, but the maximum frequencyВ will be reduced.

Note that the current provided to the LED also causes a voltage drop across the LED cable.

Each unit includes a universal (100 - 240В V) power supply with a location-specific power cord.Дimensions (W x H x D) with Operating Elements The DC2200 electronics areВ contained in a compact 112.0 mm x 85.0 mm x 190.3 mmВ (4.41' x 3.35' x 7.49')В housing which rests on four rubber feet. Additional CAB-LEDD1 cables are available for purchase separately below. The second cable (Item # CAB-LEDD1) has aВ male M8x1В connectorВ compatible with the LED2 terminal. One cable has a male 12-pin Neutrik MiniCON connector that is compatible with the LED1 terminal. See the Front & Back Panel tab for a diagramВ ofВ the back of the housing.Д®ach DC2200 includes two auxiliary cables for connecting custom LEDs for the driver. In addition to the USB 2.0 port and LED connection terminals, the back of the housing includes an SMA input for the external modulation signals, an interlock circuit that can be connected to a user-supplied emergency off switch, and grounded jack that can be used with ESD protection equipment. More information on the operating modes can be found on the Display tab. In addition to reading data stored in the EEPROM memory of LEDs with this feature, the driver can also initiate a test procedure to measure the LED forward voltage, from which it can determine the maximum current limit. The main menu of the front panel's touch screen display allows the user to select between operating the LED in constant current mode or brightness mode, internally or externally pulsed modes, and TTL modulation.

#LED DRIVER CONTROLLER CONSTANT CURRENT POWER HIGH VOLTAGE SOFTWARE#

The driver can either be controlled locally via the device front panel, as shown in the screenshot above, or from a PC using the USB 2.0 port on the back of the device and the included software package (see the Software tab). For cases where two LEDs are connected simultaneously, the front panel of the driver can be used to selectВ which LED recieves the drive current. While two LEDs can be connected to the driver, only one LED can be driven at a time. LED compatibility information is provided in the LED Options table below. The two inputs are visible in the back view of the driver housing shown above. The LED2 terminal has a female 4-pin M8x1 connectorВ designed for lower-power LEDs that require drive currents ofВ в‰¤2В A. The LED1 terminal is a female 12-pin Neutrik MiniCON connector that accommodates high-power LEDs that require drive currents up to 10В A. The back panel includes two LED connection terminals for compatibility with all of Thorlabs' high-power and mounted LEDs. A list of current / forward voltage combinationsВ outlined in the table to the right. The driver can provide a maximum LED currentВ of up to 10 AВ and maximum forward voltage of up to 50 V. The DC2200 LED Driver is designed to power many of Thorlabs' LEDs, including the Solis High-Power LEDs for Microscopy, Thorlabs' Mounted LEDs, and Thorlabs' Fiber Coupled LEDs.

Interlock Circuit Accessible on Back of Housing for Use with User Provided Emergency Switch.

External Trigger and Modulation Control.

Adjustable Frequency, Duty Cycle, and Pulse Count.

Operating Modes for Constant Current and Brightness.

MCPCB-Mounted LEDsВ Compatible with LED2В TerminalВ Using the Included CAB-LEDD1B Cable (Details Provided on Pin Diagrams Tab).

LED2 TerminalВ for Mounted, Collimated, and Fiber-CoupledВ LEDs.

LED1 Terminal for Solis В®В High-Power LEDs.

Two LED Connection Terminals Support Many of Thorlabs' LEDs.

Led driver controller constant current power high voltage